MSHA reports fatality at Utah sand and gravel facility
Tina Grady Barbaccia | April 20, 2011
In the wake of a fatality at a Utah sand and gravel operation, the Mine Safety and Health Administration (MSHA) has issued a number of recommendations as reminders to producers.
A 56-year-old equipment operator with 10 years of experience was killed on Feb. 24, 2011 at Bolinder Resources LLC – Crushing and Sampling Unit, the Mine Safety and Health Administration (MSHA) announced on April 11. The operator was cleaning a tramp metal magnet on a belt conveyor when it started.
MSHA has provided the following best practices to protect against this type of accident in the future:
- Establish policies and procedures for conducting specific tasks on belt conveyors.
- Ensure that persons are task trained and understand the hazards associated with the work being performed.
- De-energize and block belt conveyors against motion before working near a drive, head, tail, take-up pulleys, and magnets.
- Lock-out/tag-out all power sources before working on belt conveyors.
- Maintain communications with all persons performing the task. Before starting belt conveyors, ensure that all persons are clear.
- Provide and maintain a safe means of access to all working places.
- Sound an audible alarm if the entire length of the belt conveyor is not visible from the starting switch.
MORE FROM Economics
- Road worker killed while picking up construction cones1311 Views
- 4 dead after semi hits stopped vehicles1033 Views
- The state with the best roads in the country is...882 Views
- 3 tips for staying safe inside road construction work zones540 Views
- Can you believe how much bad roads cost Texas drivers?328 Views