- Better Roads - http://www.betterroads.com -
Kenworth C500s Help Premay Equipment Move 1.2 Million Pound Reactor to Canada™s Oil Fields
Posted By admin On November 30, -0001 @ 12:00 am In Boomerang | No Comments
FORT McMURRAY, Alberta March 2, 2009 To move a reactor that weighs more than the largest, fully-loaded Boeing 747 to the oil sands region in Northern Alberta, Premay Equipment relied on a herd of nine Kenworth C500s with a total of 4,800 horses under their hoods to get the job done.
The 1.2 million pound shipment consisted of a 13-foot, 8-inch diameter by 110-foot long reactor destined for the petroleum-rich oil sands mining area in northern Alberta. The reactor is part of a planned expansion of Suncor Energy™s oil sands operations.
The Kenworth C500s performed beautifully, said Brent Harris, president of Premay Equipment L.P., a subsidiary of Mullen Transportation Inc. The Edmonton-based company specializes in heavy hauls for western Canada™s oil and gas industry. Its hauling and rigging division transports giant equipment over highways and off-road to production locations such as Alberta™s oil sands. The division also hauls equipment to natural gas production fields throughout western Canada.
The enormous reactor was loaded onto a transport frame with each end of the frame supported by a hydraulic platform trailer. Each trailer was configured at 21 feet wide by 130 feet long and had 56 axles with four tires on each axle, (in all, 448 tires). One Kenworth C500 tractor in front pulled and four in back pushed the 25-foot high load at a maximum speed of 12 mph for most of the 50-mile northbound trip on Alberta Highway 63 from Lynton Siding, which is 12 miles southeast of Fort McMurray, to the job site at the Athabasca oil sands.
When the shipment got to Supertest Hill, Premay added another four Kenworth C500 tractors to the front. The nine C500s handled the three-quarters of a mile long climb, with about an 8-percent grade, without any major issues, Harris said. Thanks to the C500s, we were able to keep to our timetable, which is important because the northbound lanes of Highway 63 were closed for safety reasons.
Premay makes these mammoth moves in the cold of winter when roads freeze hard; spring and summer maneuvers of that weight would damage the highways. To keep all that weight under control and moving efficiently, Premay™s Kenworth C500s are equipped with 525-hp engines driven through Allison automatic transmissions. Four of the nine C500s have tridem drives equipped with 105,000-pound rear planetary hub-reduction axles to provide added traction on icy and snowy roads.
Premay operates a fleet of more than 50 trucks, of which more than 90 percent are Kenworths. The company™s other Kenworth models include T800s, W900s and T660s. To help keep its fleet of trucks running, Harris said the company relies on after-the-sale support from its local Kenworth dealers. Since we do most of the routine maintenance on our trucks, Edmonton Kenworth and GreatWest Kenworth offer us Kenworth PremierCare(R) Connect which links us directly to its parts department, Harris said. We use the program to manage our parts inventory and make sure we™re getting the right replacement parts, which means no delays in getting our trucks back in service.
Harris joined the company as a truck driver in 1978 when it had just three company trucks and 14 leased truck operators. In addition to quality and durability, the company chooses Kenworth trucks for driver comfort. Kenworth designs trucks with comfortable, ergonomic environments, which help our drivers stay alert and on top of things. That™s critical in our line of work because an alert driver can react better to unforeseen circumstances, said Harris.
To further enhance driver comfort, Premay plans to specify the Extended Day Cab for its next truck order, an option added for the C500 last year. The spacious Kenworth Extended Day Cab further enhances driver comfort with an additional 6 inches of length and 5 inches of cab height compared to Kenworth™s traditional day cab. The Extended Day Cab also offers 2 more inches behind the wheel, additional leg room, up to 21 degrees of recline in the driver™s seat, and 2 extra cubic feet of storage behind the driver™s seat.
Harris said he also appreciates how Kenworth™s engineers work with his company™s drivers and managers to develop the right truck specifications for his company™s application. Kenworth engineers are forward-thinking and listen to their customers. That™s how they develop trucks with all the latest technology that can help their customers run efficient and productive operations.
Kenworth Truck Company is the manufacturer of The World™s Best(R) heavy and medium duty trucks. Kenworth is an industry leader in providing fuel-saving technology solutions that help increase fuel efficiency and reduce emissions. The company™s dedication to the green fleet includes aerodynamic trucks, medium duty diesel-electric hybrids, liquefied natural gas trucks, and the Kenworth Clean Power(R) no-idle system. In addition, Kenworth is the recipient of the 2008 J.D. Power and Associates awards for Highest in Customer Satisfaction for Over the Road and Vocational Segment Class 8 trucks. Kenworth™s Internet home page is at www.kenworth.com. Kenworth. A PACCAR Company.
Article printed from Better Roads: http://www.betterroads.com
URL to article: http://www.betterroads.com/kenworth-cs-help-premay-equipment-move-million-pound-reactor-to-canadas-oil-fields/
Copyright © 2009 Better Roads. All rights reserved.