IT38G Series II Integrated Toolcarrier
Posted By admin On November 14, 2007 @ 12:00 am In Boomerang | No Comments
Improved visibility and increased static tipping loads provide unmatched performance and versatility.
Engine | Units: US | |
 | ||
Net Power – ISO 9249 | 180 hp | 134 kW |
| ||
Engine Model | Cat® 3126B ATAAC | Cat® 3126B ATAAC |
| ||
Flywheel Power | 160 hp | 119 kW |
| ||
Max. Flywheel Power | 180 hp | 134 kW |
| ||
Peak Torque (Net) @ 1,400 RPM | 619 ft-lb | 839 N·m |
| ||
Total Torque Rise | 62 % | 62 % |
| ||
Bore | 4.3 in | 110 mm |
| ||
Stroke | 5 in | 127 mm |
| ||
Displacement | 439 in3 | 7.2 L |
| ||
| ||
Weights | ||
| ||
Operating Weight | 32156 lb | 14583 kg |
| ||
| ||
Buckets | ||
| ||
Bucket Capacities | 2.21-2.8 m3 2.75-3.5 yd3 | 2.21-2.8 m3 2.75-3.5 yd3 |
| ||
Max Bucket Capacity | 3.5 yd3 | 2.8 m3 |
| ||
| ||
Transmission | ||
| ||
Forward 1 | 4.7 mph | 7.6 km/h |
| ||
Forward 2 | 8.3 mph | 13.4 km/h |
| ||
Forward 3 | 14.5 mph | 23.3 km/h |
| ||
Forward 4 | 24.1 mph | 38.8 km/h |
| ||
Reverse 1 | 4.7 mph | 7.6 km/h |
| ||
Reverse 2 | 8.3 mph | 13.4 km/h |
| ||
Reverse 3 | 14.5 mph | 23.3 km/h |
| ||
| ||
Axles | ||
| ||
Front | Fixed front | Fixed front |
| ||
Rear | Oscillating +/- 12° | Oscillating +/- 12° |
| ||
Maximum Single-Wheel Rise and Fall | 16.5 in | 420 mm |
| ||
| ||
Brakes | ||
| ||
Brakes | Meets required standards. | Meets required standards. |
| ||
| ||
Hydraulic System | ||
| ||
Bucket/Work Tool System – Pump Output | 43 gal/min | 163 L/min |
| ||
Bucket/Work Tool System – Relief Valve Setting | 3597 psi | 24800 kPa |
| ||
Hydraulic Cycle Time – Raise | 5.8 Seconds | 5.8 Seconds |
| ||
Hydraulic Cycle Time – Dump | 2 Seconds | 2 Seconds |
| ||
Hydraulic Cycle Time – Lower, Empty, Float Down | 2.9 Seconds | 2.9 Seconds |
| ||
Hydraulic Cycle Time – Total | 10.7 Seconds | 10.7 Seconds |
| ||
Pilot System – Pump Output | 26.9 gal/min | 102 L/min |
| ||
| ||
Service Refill Capacities | ||
| ||
Fuel Tank – Standard | 67.9 gal | 257 L |
| ||
Cooling System | 11.4 gal | 43 L |
| ||
Crankcase | 7.9 gal | 30 L |
| ||
Transmission | 7.9 gal | 30 L |
| ||
Differentials and Final Drives – Front | 6.3 gal | 24 L |
| ||
Differentials and Final Drives – Rear | 7.1 gal | 27 L |
| ||
Hydraulic System (Including Tank) | 23.8 gal | 90 L |
| ||
Hydraulic Tank | 20.1 gal | 76 L |
| ||
| ||
Cab | ||
| ||
ROPS/FOPS | Meets SAE and ISO standards. | Meets SAE and ISO standards. |
| ||
| ||
Tires | ||
| ||
Tires | Choose from a variety of tires to match your application. | Choose from a variety of tires to match your application. |
| ||
| ||
Operating Specifications | ||
| ||
Static Tipping Load, Full Turn | 19106 lb | 8665 kg |
| ||
Breakout Force | 24750 lb | 110 kN |
| ||
| ||
Dimensions | ||
| ||
Height to top of ROPS | 10.83 ft | 3300 mm |
| ||
Height to top of exhaust pipe | 10.59 ft | 3227 mm |
| ||
Height to top of hood | 7.74 ft | 2359 mm |
| ||
Ground clearance | 1.31 ft | 399 mm |
| ||
B-pin height – standard | 13.32 ft | 4061 mm |
| ||
Center line rear axle to edge of counterweight | 6.09 ft | 1857 mm |
| ||
Wheelbase | 9.91 ft | 3020 mm |
| ||
Center line rear axle to hitch | 4.95 ft | 1510 mm |
| ||
Article printed from Better Roads: http://www.betterroads.com
URL to article: http://www.betterroads.com/itg-series-ii-integrated-toolcarrier/
Click here to print.