- Better Roads - http://www.betterroads.com -

Gregory Industries: No dedicated support vehicle needed

Posted By Tina Grady Barbaccia On October 6, 2011 @ 2:21 pm In eRoadPro Newsletter | No Comments

Gregory Industries’ TTMA-100 trailer truck mounted attenuator (TMA) is the first hitch-mounted TL-3 approved TMA that can be used with almost any support vehicle in a fleet with 10,000-pound gross vehicle weight.

Only a standard 8-ton pintle hitch is needed for towing without vehicle modifications and without a dedicated support vehicle. Low tongue weight does not significantly reduced load-carrying capacity of support vehicle. A patented tube-bursting process uses the trailer frame as the energy absorber.

The 1,450-pound attenuator (1,750 pounds with arrow board) TMA meets all required and optional NCHRP 350 Test Level 3 (TL-3) criteria with the support vehicle blocked to eliminate all forward movement in a worse-case scenario.

For a video interview by Better Roads Executive Editor Tina Grady Barbaccia on the TTMA-100 from the American Public Works Association Show (APWA) 2011, click here.

Article printed from Better Roads: http://www.betterroads.com

URL to article: http://www.betterroads.com/gregory-industries-no-dedicated-support-vehicle-needed/

Copyright © 2009 Better Roads. All rights reserved.