- Better Roads - http://www.betterroads.com -

GENIE REDESIGNS ITS GTH-1048 AND GTH-1056 TELEHANDLERS TO MAXIMIZE JOBSITE EFFICIENCY

Posted By admin On November 19, 2007 @ 12:00 am In Uncategorized | No Comments

Genie redesigned its GTH-1048 and GTH-1056 rough terrain telehandlers to easily maneuver in tight spaces without compromising reach and lift capacity. Whether they are needed to lift or set materials around a worksite, both are ideal machines for moving heavy loads, like steel and bricks, with a maximum lift capacity up to 10,000 lbs (4,536 kg). The GTH-1048 has 31 ft (9.45 m) of outreach and is capable of lifting 6,000 lbs (2,722 kg) to 48 ft (14.63 m) and the GTH-1056 features an outreach of 40 ft (12.19 m) and lifts 4,000 lbs (1,814 kg) to 56 ft (17.07 m).


 


Our goal was to optimize the design to provide a simple, reliable and versatile machine for our customers, says Luke Webber, Genie Telehandler product manager. With the redesign, these units offer contractors improved load carrying capacity for higher utilization rates, as well as a revamped quick attach system, which allows for more interchange of attachments between models and brands. The GTH-1048 and GTH-1056 models are ideal for framing, heavy construction, masonry and industrial applications.


 


With an outside turning radius of just under 14 ft (4.2 m) and three different steering modes ” crab, coordinated and front wheel ” the GTH-1048 and GTH-1056 come standard with a multitude of features that allow easy maneuverability around tight job sites. Both offer the choice of a turbo-charged, 4-cylinder Perkins or John Deere diesel engine, and both feature standard 4-wheel drive. With twin axle-mounted stabilizers, as well as a frame-leveling chassis, operators can make side-to-side adjustments on up to 10° side slopes. Terrainability is also enhanced on these units with a 20.5 in (0.52 m) break-over ground clearance, which allows operators to position the machine precisely where it is needed to work.


 


The GTH-1048 and GTH-1056 are designed with simple, logical controls that respond to an operator™s every command. The single, multi-function joystick comes with an integrated sway control that allows operators to control the boom and level the chassis without taking a hand off the joystick.


 


Genie engineered the new GTH-1048 and GTH-1056 models with spacious, ergonomically designed cabs. Both units feature an adjustable suspension seat with standard retractable 3-in seat belt, easy-to-access controls for operator comfort and productivity and offer an optional enclosed cab with flat glass windows for enhanced visibility.


 


Most of the components are interchangeable and common across Genie™s entire rough terrain telehandler line, so service centers are able to stock fewer parts and technicians are able to apply existing maintenance knowledge. Service has also been made easier with no-tool access to all the daily inspection points. Additionally, test ports are conveniently located at the manifolds and one person can easily check the hydraulic functions from the comfort of the cab.


 


About Genie


Headquartered in Redmond, Wash., with branch offices worldwide, Genie Industries manufactures material lifts, aerial work platforms, trailer-mounted booms and light towers, scissor lifts, self-propelled telescopic and articulating booms and telehandlers. For more information, please visit http://www.genieindustries.com/.


 


Genie Industries, Inc. is a subsidiary of Terex Corporation (NYSE: TEX), a diversified global manufacturer based in Westport, Conn. For more information on Terex, please visit http://www.terex.com/.


 


Article printed from Better Roads: http://www.betterroads.com

URL to article: http://www.betterroads.com/genie-redesigns-its-gth-and-gth-telehandlers-to-maximize-jobsite-efficiency/

Copyright © 2009 Better Roads. All rights reserved.