- Better Roads - http://www.betterroads.com -

992G Wheel Loader

Posted By admin On November 15, 2007 @ 12:00 am In Boomerang | No Comments

Innovative performance you can feel. The 992G is a revolutionary advancement in large wheel loader design, providing a 22 metric ton (24 ton) payload for the most demanding applications.


 


 


 


 


 
















































































































































































































































































































































































































































































































































Engine

Units:  US 


Net Power


800 hp



Engine Model


Cat® 3508B DITA EUI



Gross Power


880 hp



Net Power – Caterpillar


800 hp



Net Power – EEC 80/1269


800 hp



Net Power – ISO 9249


800 hp



Net Power – SAE J1349


791 hp



Net Power – DIN 70020


829 PS



Gross Power – ISO 3046-2


880 hp



Bore


6.7 in



Stroke


7.5 in



Displacement


2105 in3



Torque Rise


30 %




Operating Specifications



Operating Weight


209278 lb



Rated Payload


24 tons



Articulation Angle


43 Degrees




Buckets



Bucket Capacities


11.5-12.3 m3 15-16 yd3




Transmission



Transmission Type


Planetary powershift



Forward 1


4.1 mph



Forward 2


7.15 mph



Forward 3


12.37 mph



Reverse 1


4.54 mph



Reverse 2


7.83 mph



Reverse 3


13.67 mph



Converter Drive – Forward 1


4.1 mph



Converter Drive – Forward 2


7.1 mph



Converter Drive – Forward 3


12.4 mph



Converter Drive – Reverse 1


4.5 mph



Converter Drive – Reverse 2


7.8 mph



Converter Drive – Reverse 3


13.6 mph



Direct Drive – Forward 1


Lock-up disabled



Direct Drive – Forward 2


7.7 mph



Direct Drive – Forward 3


13.5 mph



Direct Drive – Reverse 1


4.8 mph



Direct Drive – Reverse 2


8.5 mph



Direct Drive – Reverse 3


14.9 mph




Axles



Maximum Single-Wheel Rise and Fall


24.8 in



Front


Fixed



Rear


Trunnion



Oscillation Angle


10 Degrees




Hydraulic Cycle Time



Raise


9.12 Seconds



Dump


3.26 Seconds



Lower Float Down (Empty)


3.47 Seconds



Total Hydraulic Cycle Time


15.85 Seconds




Loader Hydraulic System



Relief Valve Setting


4500 psi



Cylinders, Double Acting: Lift, Bore and Stroke


279.4 mm x 1173 mm 11.0 in x 46.2 in



Cylinder, Double Acting: Tilt, Bore and Stroke


279.4 mm x 1816 mm 11.0 in x 71.5 in



Relief Valve Setting (low idle)


363 psi




Steering



Steering


Meets SAE and ISO standards.



Total Steering Angle


86 Degrees



Minimum Turning Radius (over bucket)


430.71 in




Service Refill Capacities



Fuel Tank


413 gal



Cooling System


53.89 gal



Crankcase


26.5 gal



Transmission


44.6 gal



Differentials and Final Drives – Front


91 gal



Differentials and Final Drives – rear


86 gal



Hydraulic System (factory fill)


168 gal



Hydraulic System (tank only)


84.8 gal



Hydraulic System – Steering and Engine Cooling Fan


60 gal



Hydraulic System (including tank)


170.66 gal




Brakes



Brakes


Meets SAE J1473 OCT90 and ISO 3450: 1992




Cab



Sound Performance


Meets ANSI/SAE and ISO requirements




Dimensions*



Height to Top of Exhaust Stacks


18.34 ft



Height to Top of ROPS/FOPS


18.34 ft



Height to Top of Hood


13.07 ft



Ground Clearance


2.27 ft



Reach at Max. Lift/Dump – Std


7.81 ft



Overall Height Bucket Raised – Std


30.89 ft



Length – Rear Axle to Bumper


13.76 ft



Wheel Base Length


19.32 ft



Overall Length – Std


53.23 ft



Hinge Pin Height at Full Lift – Std


22.77 ft



Length with Bucket on Ground


613.58 in


Article printed from Better Roads: http://www.betterroads.com

URL to article: http://www.betterroads.com/g-wheel-loader/

Copyright © 2009 Better Roads. All rights reserved.