Doosan DX140LCR-3 excavator features reduced tail swing
Amanda Bayhi | June 21, 2013
Doosan’s DX140LCR-3 reduced tail swing excavator is ideal for a variety of road building, development and commercial construction projects, according to a report from our sister site, Equipment World.
A Tier 4 Interim four-cylinder Cummins QSB 4.5 engine powers the 16-ton machine, delivering 109 horsepower at 2,200 rpm and a maximum speed of 2.9 mph.
The excavator has a radius of 5 feet with a tail swing overhang of 9 inches over the side of the machine. The machine offers a maximum reach of 28 feet 5 inches, a maximum dig depth of 19 feet 8 inches, a 24,471-pound bucket digging force and a 13,228-pound arm digging force.
The DX140LCR-3 features a 12-foot 4-inch track length to ensure stability during operation. An optional 102-inch-wide dozer blade is also available.
The machine’s electronic power optimizing system includes four work modes, auto-idle and machine diagnostics. A straight travel pedal is available for use in trenching applications.
The ROPS cab features an air suspension heated seat with a height lever and tilting function, a thickened dampening plate on the cabin mounting mechanism and an internal coil spring to reduces cabin vibration by 20 percent over previous models.
MORE FROM New Road Products
- 4 dead after semi hits stopped vehicles1034 Views
- Several deficiencies exposed in Skagit River Bridge collapse739 Views
- Can you believe how much bad roads cost Texas drivers?307 Views
- VIDEO: Watch time-lapse of I-84 bridge replacement304 Views
- President Obama to urge for private investments292 Views