793D Mining Truck
Posted By admin On December 12, 2007 @ 12:00 am In Boomerang | No Comments
The 793D Mining Truck is available in five merchandising arrangements: ¢ Standard – for balanced all-around performance ¢ Extended Life Wheel Groups – for long, uphill hauls ¢ Extra Top Speed – for long, flat hauls ¢ Extra Retarding – for long, downhill loaded hauls ¢ High Altitude Arrangement – for operations above 2750 m (9,000 ft)
.gif)
Engine | Units: US | |
 | ||
Net Power | 2337.4 hp | 1743 kW |
| ||
Net Power – SAE J1349 | 2337 hp | 1743 kW |
| ||
Rated Power | 1750 RPM | 1750 RPM |
| ||
Engine Model | Cat 3516B HD EUI | Cat 3516B HD EUI |
| ||
Net Power – ISO 9249 | 2337 hp | 1743 kW |
| ||
Net Power – 80/1269/EEC | 2337 hp | 1743 kW |
| ||
Torque Rise | 23 % | 23 % |
| ||
Bore | 6.7 in | 170 mm |
| ||
Stroke | 8.5 in | 215 mm |
| ||
Displacement | 4760 in3 | 78 L |
| ||
Gross Power – SAE J1995 | 2415 hp | 1801 kW |
| ||
| ||
Operating Specifications | ||
| ||
Nominal Payload Capacity | 240 tons | 218 tonnes |
| ||
Top Speed – Loaded | 33.7 mph | 54.3 km/h |
| ||
Body Capacity (SAE 2:1) | 169 yd3 | 129 m3 |
| ||
Maximum Capacity | 214.56 tons | 218 tonnes |
| ||
Maximum Capacity | Custom | Custom |
| ||
Steer Angle | 36 Degrees | 36 Degrees |
| ||
Turning Radius – Front | 93.2 ft | 28.42 m |
| ||
Raise Time | 20.3 Seconds | 20.3 Seconds |
| ||
Lower Time | 17.5 Seconds | 17.5 Seconds |
| ||
Turning Circle Clearance Diameter | 107.15 ft | 32.66 m |
| ||
| ||
Weights – Approximate | ||
| ||
Gross Machine Operating Weight | 846000 lb | 383749 kg |
| ||
Chassis Weight | 257294 lb | 116707 kg |
| ||
Body Weight Range | 21 795 – 54 431 kg / 48,050 – 120,000 lb | 21 795 – 54 431 kg / 48,050 – 120,000 lb |
| ||
| ||
Transmission | ||
| ||
Forward 1 | 7.3 mph | 11.8 km/h |
| ||
Forward 2 | 9.9 mph | 15.9 km/h |
| ||
Forward 3 | 13.4 mph | 21.5 km/h |
| ||
Forward 4 | 18.1 mph | 29 km/h |
| ||
Forward 5 | 24.5 mph | 39.4 km/h |
| ||
Forward 6 | 33.7 mph | 54.3 km/h |
| ||
Reverse | 6.8 mph | 10.9 km/h |
| ||
| ||
Final Drives | ||
| ||
Differential Ratio | 1:8:1 | 1:8:1 |
| ||
Planetary Ratio | 16:1 | 16:1 |
| ||
Total Reduction Ratio | 28.8:1 | 28.8:1 |
| ||
| ||
Suspension | ||
| ||
Effective Cylinder Stroke – Front | 5.2 in | 130.5 mm |
| ||
Effective Cylinder Stroke – Rear | 4.2 in | 105.5 mm |
| ||
Rear Axle Oscillation | +/- 4.9º | +/- 4.9º |
| ||
| ||
Brakes | ||
| ||
Outside Diameter | 34.5 in | 874.5 mm |
| ||
Brake Surface – Front | 13921 in2 | 89817 cm2 |
| ||
Brake Surface – Rear | 20847 in2 | 134500 cm2 |
| ||
Standards | J-ISO 3450 JAN88, ISO 3450:1996 | J-ISO 3450 JAN88, ISO 3450:1996 |
| ||
| ||
Body Hoists | ||
| ||
Pump Flow – High Idle | 224 gal/min | 846 L/min |
| ||
Relief Valve Setting – Raise | 2955 psi | 20370 kPa |
| ||
Body Raise Time – High Idle | 20.25 Seconds | 20.25 Seconds |
| ||
Body Lower Time – Float | 19.26 Seconds | 19.26 Seconds |
| ||
Body Power Down – High Idle | 17.51 Seconds | 17.51 Seconds |
| ||
| ||
Capacity – Dual Slope – 100% fill factor | ||
| ||
Struck | 126 yd3 | 96 m3 |
| ||
Heaped (SAE 2:1) | 169 yd3 | 129 m3 |
| ||
| ||
Service Refill Capacities | ||
| ||
Fuel Tank | 1150 gal | 4354 L |
| ||
Fuel Tank (optional) | 1300 gal | 4922 L |
| ||
Cooling System | 257 gal | 973 L |
| ||
Crankcase | 70 gal | 265 L |
| ||
Rear Axle Housing | 270 gal | 1022 L |
| ||
Steering Tank | 60 gal | 227 L |
| ||
Steering System (Includes Tank) | 90 gal | 341 L |
| ||
Brake/Hoist Hydraulic Tank | 203 gal | 769 L |
| ||
Brake/Hoist System (Includes Tank) | 363 gal | 1375 L |
| ||
Torque Converter/Transmission Sump | 27 gal | 102 L |
| ||
Torque Converter/Transmission System (Includes Sump) | 50 gal | 189 L |
| ||
| ||
Dimensions | ||
| ||
Height to Top of ROPS | 18.32 ft | 5584 mm |
| ||
Overall Body Length | 42.17 ft | 12862 mm |
| ||
Inside Body Length | 25.3 ft | 7712 mm |
| ||
Overall Length | 42.2 ft | 12862 mm |
| ||
Wheelbase | 19.37 ft | 5905 mm |
| ||
Rear Axle to Tail | 12.38 ft | 3772 mm |
| ||
Ground Clearance | 3.3 ft | 1005 mm |
| ||
Dump Clearance | 4.48 ft | 1364 mm |
| ||
Loading Height – Empty | 19.26 ft | 5871 mm |
| ||
Inside Body Depth – Max | 7.64 ft | 2330 mm |
| ||
Overall Height – Body Raised | 43.02 ft | 13113 mm |
| ||
Operating Width | 25.17 ft | 7680 mm |
| ||
Centerline Front Tire Width | 18.41 ft | 5610 mm |
| ||
Engine Guard Clearance | 4.25 ft | 1294 mm |
| ||
Overall Canopy Width | 25.2 ft | 7680 mm |
| ||
Outside Body Width | 25.17 ft | 7680 mm |
| ||
Inside Body Width | 21.33 ft | 6500 mm |
| ||
Front Canopy Height | 21.31 ft | 6494 mm |
| ||
Rear Axle Clearance | 3.66 ft | 1128 mm |
| ||
Centerline Rear Dual Tire Width | 16.25 ft | 4963 mm |
| ||
Overall Tire Width | 24.92 ft | 7605 mm |
| ||
| ||
ROPS | ||
| ||
ROPS Standards | .ISO 3471:1994 | .ISO 3471:1994 |
| ||
| ||
Sound | ||
| ||
Sound Standards | .ANSI/SAE J1166 MAY90 | .ANSI/SAE J1166 MAY90 |
| ||
| ||
Steering | ||
| ||
Steering Standards | SAE J1511 OCT90, ISO 5010:1992 | SAE J1511 OCT90, ISO 5010:1992 |
| ||
| ||
Tires | ||
| ||
Standard Tire | 40.00R57 | 40.00R57 |
| ||
| ||
Weight Distributions – Approximate | ||
| ||
Front Axle – Empty | 46 % | 46 % |
| ||
Rear Axle – Empty | 54 % | 54 % |
| ||
Front Axle – Loaded | 33 % | 33 % |
| ||
Rear Axle – Loaded | 67 % | |
Article printed from Better Roads: http://www.betterroads.com
URL to article: http://www.betterroads.com/d-mining-truck/
Click here to print.