- Better Roads - http://www.betterroads.com -
Caterpillar Introduces Three Mid-Sized Hydraulic Excavators, Each with a Different Swing Radius for Different Applications
Posted By admin On October 24, 2007 @ 12:00 am In Boomerang | No Comments
Caterpillar introduces three new mid-sized hydraulic excavators”the 320D L with standard swing radius, the 320D LRR with reduced swing radius, and the 321D LCR with compact radius. The new D-Series machines feature greater performance and versatility than the C-Series machines they replace. The new excavators also feature the Cat® C6.4 engine with ACERT Technology for fuel-efficient operation and emissions compliance. A new, spacious cab promotes operator comfort in the 320D L and 320D LRR, and a new cab layout aids operators in the 321D LCR. New styling also sets the excavators apart.
To purchase a copy of this video, please contact you local Caterpillar dealerand ask for Media No. TEVN3059.
The three machines perform at comparable levels, but each has unique strengths:
For expanded versatility, many factory-installed options are available. The D-Series excavators feature a wide range of factory-installed auxiliary hydraulic systems, including a one-way, high pressure, high flow circuit for hammers and vibratory plate compactors. Also, a two-way circuit is available for thumbs and other hydra-mechanical work tools.
Another option is the Tool Control System for D-Series models. The Tool Control System is exclusive to Caterpillar and allows operators and technicians to set auxiliary hydraulics flows and pressures by using the monitor in the cab instead of using expensive service tools. The customer can pre-set and store as many as 10 flow and pressure settings for 10 different hydra-mechanical work tools.
High performance and fuel efficiency
The Cat C6.4 engine powers the new excavators and produces 148 net horsepower (110 kW). The engine employs ACERT Technology, which combines incremental improvements in fuel delivery, air management and electronic control to optimize engine performance and to meet U.S. EPA Tier 3 emissions regulations.
The ADEM A4 electronic control module manages fuel delivery to get the best performance per unit of fuel used. The engine management system provides flexible fuel mapping, allowing the engine to respond quickly to varying application needs.
The new excavators incorporate additional systems to save fuel. The Standard Power Mode can reduce fuel consumption as much as 8 percent when performing work that doesn™t require full power. Automatic Engine Speed Control cuts engine speed in no-load or light-load situations. And the cooling system has a demand fan controlled by a viscous clutch, which automatically adjusts fan speed to meet cooling requirements.
Hydraulic system pressure is increased in the new excavators. Higher pressure creates stick and bucket forces that are about 7 percent greater than the previous models for aggressive digging. For enhanced control, the redesigned main hydraulic valve improves joystick response and makes finish work easier. As with the previous models, the D-Series models use a hydraulic cross sensing system that can maximize hydraulic power when needed for faster implement speeds.
The new machines have more lift capacity than the previous models, especially over the front. Drawbar pull is up about 5 percent greater for increased maneuverability and solid performance when moving on slopes or when traveling in poor underfoot conditions.
New cab and operator station
The operator station of the 320D L and 320D LRR is spacious, quiet and comfortable. A smaller, comfortable cab with an efficiency-enhancing layout equips the 321D LCR. The seat and armrests are easy to adjust to suit the operator. A new, optional air suspension seat with heater is available. The fully automatic climate control adjusts temperature and air flow, and it also determines which air outlet is best in each situation.
The new monitor is a full color liquid crystal display that can be adjusted to minimize the effects of glare. The graphical display is easier to read and navigate than the C-Series monitor”for both operators and maintenance technicians.
All glass is affixed directly to the cab, which eliminates window frames. Pillar-mounted wipers also increase the operator™s viewing area.
For more information about the new 320D L, 320D LRR and 321D LCR, customers should contact their Cat dealer or visit the Caterpillar web site at http://www.cat.com/.
Basic Specifications for 320D L, 320D LRR and 321D LCR Hydraulic Excavators
|320D L||320D LRR||321D LCR|
|Operating weight||47,554 lb (21 570 kg) 1||53,361 lb (24 200 kg)1||53,307 lb (24 180 kg)2|
|Engine model||Cat C6.4 ACERT||Cat C6.4 ACERT||Cat C6.4 ACERT|
|Net power||148 hp (110 kW)||148 hp (110 kW)||148 hp (110 kW)|
|Bucket dig force (SAE)||28,079 lb (125 kN)||28,079 lb (125 kN)||28,079 lb (125 kN)|
|Max. reach (horizontal)||32 ft 4 in. (9860 mm)||32 ft 4 in. (9860 mm)||31 ft 9 in. (9690 mm)|
|Max. digging depth||20 ft 11 in. (6370 mm)||20 ft 11 in. (6370 mm)||21 ft 9 in. (6620 mm)|
|Track length||14 ft 7 inches (4455 mm)||14 ft 7 inches (4455 mm)||14 ft 7 inches (4455 mm)|
1Long undercarriage; reach boom, 9 ft 7 in. stick, 1.18 cu yd bucket, 32 in. shoes.
2Long undercarriage; reach boom, 9 ft 6 in. stick, 1.3 cu yd bucket, 32 in. shoes
Article printed from Better Roads: http://www.betterroads.com
URL to article: http://www.betterroads.com/caterpillar-introduces-three-midsized-hydraulic-excavators-each-with-a-different-swing-radius-for-different-applications/
Copyright © 2009 Better Roads. All rights reserved.