- Better Roads - http://www.betterroads.com -

CASE Stump Grinders

Posted By admin On December 13, 2007 @ 12:00 am In Boomerang | No Comments

CASE Stump Grinders offer the following advantages:


- Models available for standard flow and high flow skid steers.


- Grinds stumps up to 12 inches below ground level.


- 60 degree range of motion covers 45 inches in a single sweep.


- Chips thrown away from loader protects operator.


Specifications:

















































































Model


CG40


CG60


Overall length


64.1 inches (1.63m)


64.1 inches (1.63m)


Telescopic extension


7 inches (178mm)


7 inches (178mm)


Horsepower delivered


To 40 HP (29.8 kW)


To 60 HP (44.7 kW)


Cutting height above ground


21 inches (533 mm)


21 inches (533 mm)


Cutting depth below ground


16 inches (406 mm)


16 inches (406 mm)


Cutting wheel width


3.25 inches (83 mm)


3.25 inches (83 mm)


Cutting width


60 inches (1.52 m)


60 inches (1.52 m)


Swing range


140°


140°


Type of teeth


0.5 inch (12.7 mm) slanted, carbide tip


0.5 inch (12.7 mm) slanted, carbide tip


Number of teeth


32


32


Wheel diameter


18 inches (457 mm)


18 inches (457 mm)


Wheel speed (approx.)


900 RPM


900 RPM


Weight


775 lb (352 kg)


840 lb (381 kg)


Driveline


High-torque gerotor motor


Planetary/piston


Minimum required flow


25 GPM (91 L/min)


30 GPM (98 L/min)


Maximum flow


30 GPM (98 L/min)


46 GPM (174 L/min)


Minimum pressure required


2000 PSI (138 BAR)


2000 PSI (138 BAR)


Maximum pressure


3000 PSI (207 BAR)


5000 PSI (345 BAR)


Article printed from Better Roads: http://www.betterroads.com

URL to article: http://www.betterroads.com/case-stump-grinders/

Copyright © 2009 Better Roads. All rights reserved.