- Better Roads - http://www.betterroads.com -

Breaker Technology (BTI) introduces Hydraulic Breaker ‘powerhouse’

Posted By admin On October 29, 2008 @ 12:00 am In Boomerang | No Comments

The BXR160 at 16,000 ft-lbs, is designed for rugged, continuous duty for use in demanding breaking applications.  It offers an extra long stroke design which improves the power-to-weight ratio of the breaker, providing the widest carrier range (120,000 to 220,000 pounds) and power available. Precise tolerances between the piston and cylinder provide high efficiency, blow rate and power.  Large cross section upper and lower shock absorbing isolators reduce vibration feedback to the carrier.  BTI”s exclusive front head restraint system tightly guides the front head within the housing, reducing loading to the tie rods and the upper portion of the breaker.  A narrow box housing design is well suited to tight trenching conditions.


  


Working weight:  12,000 lbs (may vary depending on bracket)


Tool diameter:  8 inches


Flow range:  85 to 120 gpm


Operating pressure:  2,030 to 2,755 psi


Frequency range:  260 to 425 bpm in long stroke mode (high impact), 340 to 530 in short stroke mode (high frequency) – manually controlled via hydraulic piloted stroke control


 


Breaker Technology manufactures and distributes a wide range of hydraulic breakers, demolition attachments, rockbreaker systems and mine utility vehicles, through a worldwide network of authorized dealers. 


 


For more information, please contact Tom Witt, Director of Sales-US 951-369-0878, or Robert McArthur, Director of Sales-Cda & International – 519-599-2015; sales@rockbreaker.com; www.rockbreaker.com


Article printed from Better Roads: http://www.betterroads.com

URL to article: http://www.betterroads.com/breaker-technology-bti-introduces-hydraulic-breaker-powerhouse/

Copyright © 2009 Better Roads. All rights reserved.