Utah State University study: Snap-Tite’s Hydro-Bell improves flow
April 25th, 2012
Category: Erosion Control
A recent independent study conducted by Utah State University determined that Snap-Tite’s inlet control device, the Hydro-Bell, increases hydraulic flow by nearly 30 percent, relative to the flow through a standard square end inlet condition typically found in culvert applications. The device is ideal for flood-prone culvert rehabilitation projects.
Also according to the study, as head pressure increases, the Snap-Tite Hydro-Bell system flow rate also increases. The Hydro-Bell is designed to “snap” onto the standard Snap-Tite culvert lining system’s machined ends – providing a larger, wider intake at the culvert entrance.
Hydraulic flow in short runs of pipe, such as drainage culverts, is often controlled by inlet and/or outlet conditions. It is possible to maximize flow rate by altering the inlet or outlet conditions in the culvert. However, in most cases, the outlet conditions are difficult to alter; but it is possible to modify the inlet condition.
Currently the Hydro-Bell is available in liner sizes from six to 63 inches. However, larger sizes are available on special request. The Hydro-Bell design consists of rounding the inlet with a leading radius, which transitions to a diametrical recess in the interior of the Hydro-Bell structure.
All Erosion Control:
The appearance of advertisements and product information on this site does not constitute an endorsement by Better Roads Magazine, and Better Roads Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
- Oklahoma DOT looks to Caltrans for bridge assessment advice362 Views
- PHOTOS, VIDEO: MoDOT employee finds a new way of transportation… skydiving348 Views
- 3 Ways to Avoid Heat-Related Illness296 Views
- Roundabouts And Intersections: Two Traffic Control Devices, Many Options289 Views
- CBO: Highway Trust Fund would shortfall under Obama's proposed budget228 Views