Cutting Wheels | Better Roads

The Freedom To Cut Anywhere!

November 2nd, 2007

Category: Air-cooled Saws, Chain Saws, Concrete Cutters, Concrete Saws, Cutting Wheels, Saw Blades

All Products
Manufacturers
TopBid

The Freedom to Cut Concrete Anywhere!

The New 2007 model ICS 633GC sets the standard for what is possible in portable concrete cutting. Newly upgraded to better meet the extreme demands of the construction world, the 633GC combines all the breakthrough functional advantages of our original gas saw with more than enough power to do the job and the reliability to keep you in the cut longer. There is simply no better saw for the wide range of cutting requirements encountered on the job.

Advantages and Uses

Deep cuts up to 16-inches
Square Corners without over-cuts
Safe to operate, no “kickback”
Wet-cut, no hazardous dust

Product Specifications:

	633GC
Weight	27.5 lbs (12.5 kg) with bar and chain
Bar Length	Up to 16-inches (40 cm)
Engine Speed	11500 ± 500 rpm mechanically governed 2500-2800 rpm idle
Horsepower	6.5 hp (4.8 kW) @ 8700 rpm
Engine Type	2-stroke, single-cylinder, air-cooled
Displacement	6.2 cu.inch (101 cc)
Chain Speed	4950 fpm (25 m/s), free running
Dimensions	23 inches (58 cm) Length 14 inches (35 cm) Height 12 inches (30 cm) Width
Water Supply	Minimum 20 psi (1.5 bar)
Fuel Mix Ratio	25:1 gasoline-to-oil
Fuel Capacity	0.26 gal (1 liter) 12-15 minutes run time per tank

Improved Features for 2007

Special crankshaft sealing and air filtration
Special water resistant electronic ignition
New leaf spring starter pawl design
New slurry channel feature eliminates starter clogging
Better vibration isolation
More durable crankcase

1	IMPROVED WallWalker® Mount Improved durability due to heavier cross sections and no recessed nut pockets
2	IMPROVED Muffler Mounting Double torqued heavy-duty wave washers hold muffler more securely
3	IMPROVED Vibration Isolation larger diameter “bumpers” reduce vibration transfer under full load
4	IMPROVED Crankcase All aluminum crankcase resists cracking longer
5	IMPROVED Starter New leaf-spring design eliminates starter pawl hang-ups New starter-cover design channels slurry to prevent clogging
6	IMPROVED Ignition Coil Improved sealing prevents shorting in any cutting position
7	IMPROVED – Crankcase Protection New wear-resistant, heavy-duty, soft PVC guard provides extra crank case protection against abrasion from concrete

All Cutting Wheels:

ICS Blount Inc

Stihl Incorporated

Diamonds are a Guy™s Best Friend STIHL Diamond Wheel; Brute Precision

Manufacturers of Cutting Wheels:

ICS Blount Inc
Stihl Incorporated

The appearance of advertisements and product information on this site does not constitute an endorsement by Better Roads Magazine, and Better Roads Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.