Pavegrip® Hot Mix Adhesion Promoter
September 4th, 2008
Category: Concrete Crack Filler
Unique Paving Materials Corporation, the manufacturer of UPM Permanent Pavement Repair Material, the most cost effective cold mix in the industry, now offers Pavegrip Hot Mix Adhesion Promoter. Pavegrip is a high-performance hot mix anti-stripping additive formulated to improve the performance and longevity of asphalt pavements.
The unretouched photo of the core samples above shows an actual mix design with and without Pavegrip. It is apparent that the sample without Pavegrip exhibits stripping of the asphalt cement from the aggregate. Stripping or loss of adhesion leads to premature pavement failures. Pavegrip dramatically improves adhesion and increases the tensile strength ratio of the mix.
High Performance = Cost Effectiveness
Pavegrip is specially formulated to increase the lifespan of asphalt pavements. Industry studies have shown adhesion promoters can increase a pavement”s quality lifespan by over 30%. This can be obtained by using as little as one half pound of Pavegrip per ton of asphalt mix. Tests such as AASHTO T-283, ASTM D-4867 or the Hamburg Wheel Test all show significant improvement when using Pavegrip in the mix design. Usual dosage is 0.5 to 1.0% of the weight of the asphalt in the mix. Pavegrip is also less than half the cost of hydrated lime.
Easy and Safe to Use
Pavegrip is a unique, high-performance, low-odor liquid with excellent heat stability that can be added directly into the asphalt cement. It can be added at the asphalt terminal or at a local hot mix plant. Unique”s technical engineers can help you determine the best method for your application or facility. This simple process eliminates product loss as well as lime dust contamination into the atmosphere.
Manufactured Under the Highest Standards
Strict quality control procedures are established for the entire manufacturing process. Our state-of-the-art laboratory analyzes each and every Pavegrip production run. These quality assurance practices ensure that every batch meets our high standards for quality and consistency. Unique Paving Materials has long been known for product performance, reliability and our reputation is one of the highest in the industry. Unique”s quality control process is designed to provide you with a superior product each and every time.
All samples are taken from production runs so you can be sure that what you test in your laboratory is what we will deliver to your facility. Authorized Unique representatives will help you determine the proper use and formulation for Pavegrip. This support will help you design a longer lasting road. Pavegrip is manufactured in the USA and is readily available in bulk, 250-gallon totes and 55-gallon drums.
All Concrete Crack Filler:
Manufacturers of Concrete Crack Filler:
The appearance of advertisements and product information on this site does not constitute an endorsement by Better Roads Magazine, and Better Roads Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
- PHOTOS, VIDEO: MoDOT employee finds a new way of transportation… skydiving348 Views
- Oklahoma DOT looks to Caltrans for bridge assessment advice321 Views
- 3 Ways to Avoid Heat-Related Illness296 Views
- Roundabouts And Intersections: Two Traffic Control Devices, Many Options289 Views
- CBO: Highway Trust Fund would shortfall under Obama's proposed budget228 Views