Bergkamp’s New M1E Continuous Paver Electronically Simplifies Slurry Seal & Micro Surfacing
Better Roads Staff | February 25, 2010
SALINA, KS – Bergkamp Inc., based in Salina, KS, offers the new M1E self-propelled continuous slurry seal and micro surfacing paver, which combines two of its innovative technologies to form one of the most productive pavement preservation machines available. Bergkamp equips the only full-size continuous slurry seal and micro surfacing paver manufactured worldwide with its innovative EMCAD (Electronic Mix Control and Diagnostic) System that electronically controls production and sends constant feedback to the operator. All major component clutches, chains and sprockets on the standard M1 have been replaced with direct-drive hydraulics to work with the EMCAD System, reducing the number of wear parts and maintenance points on the machine. The system ties material ratios of aggregate, asphalt emulsion, water, additive and fines together with an electronic signal and automatically maintains the ratios with feedback loops. In addition, it electronically self-diagnoses control system or engine problems and displays a simple error code, reducing troubleshooting and repair time.
Calibration is simplified with the EMCAD System, so fewer steps are required and manual calculations are eliminated. It displays current and average material ratios, total material used and material application rates—and can produce on-demand reports to track production for individual sections of the job, or the entire job, via an onboard printer. Operators and owners can evaluate these printouts and make necessary adjustments immediately to more efficiently run the machine and calculate the bottom line.
“This machine has cut our calibration time in half,” said Rusty Price, General Manager for the Utah-based Intermountain Slurry Seal branch and owner of an M1E. “And with this new technology’s computerized monitoring system, we know the percentage of each mix ingredient that goes onto the roadway at all times. At any time during or after the job, we can request a print out of the system to determine whether the crew is meeting the required specifications.”
The M1E reduces the number of construction joints on the job by receiving a constant supply of material while the machine is working. Ideal for all jobs—from residential streets to main line paving of interstates, including those with strict quality requirements—it applies a new slurry seal or micro surfacing finish that can extend the life of the surface up to seven years.
Bergkamp Inc. has been manufacturing pavement maintenance equipment since 1980. It offers a full line of truck-mounted, trailer-mounted and continuous slurry seal and micro surfacing pavers and equipment, as well as pothole patching equipment. Bergkamp’s headquarters and manufacturing facility is located in Salina, KS, with additional sales offices in Waco, TX, and Arlington, VA. The company works with customers throughout North America and the world. For more information, contact Bergkamp, 3040 Emulsion Drive, Salina, KS 67401; phone 785.825.1375; fax 785.825.4269; e-mail: firstname.lastname@example.org; or visit www.bergkampinc.com.
MORE FROM Boomerang
- VIDEO: Watch these crews slide a half-mile, 30 million-pound bridge into place over the Ohio River562 Views
- 5 Options for Avoiding Highway Trust Fund Insolvency548 Views
- Foxx: Insolvent transportation system could cost 700k jobs395 Views
- What the latest Obamacare update means for your business344 Views
- U.S. DOT predicts August shortfall in latest Highway Trust Fund Ticker update336 Views